Spasciani 203 Screw Filter ABEK2/P3 RD
Working with gases, vapours and dust asks a lot from your respiratory protection. This 203 screw filter combines several protection types in one cartridge, covering organic and inorganic gases, sulphur dioxide and other acid gases, ammonia and particles. It is a practical choice for professionals who need one filter that handles a broad range of hazards on the job.
Key Features
- Combined protection against gases, vapours and particles
- Filter class 2 with medium capacity
- Rated for concentrations up to 5,000 ppm (0.5%)
- Protection against organic vapours above 65°C
- P3 dust filter for severe conditions
Recommendations from our Unishore Expert
Our advice is to check the filter before every shift. Make sure the screw connection sits firmly and the housing shows no damage. If breathing becomes harder or you notice a change in taste or smell, replace the filter straight away. Keep the relative humidity below 80%, as shown on the label, to get the most from the filter. Always match the filter type to the hazard you face, because this filter offers protection according to strict safety standards.
Product Kenmerken
- Article number: 418365
- Mask type: Supplied Air systems, Accessories
- Filter type A: Organic gases and vapours with boiling point above 65°C
- Filter type B: Inorganic gases and vapours other than carbon monoxide
- Filter type E: Sulphur dioxide and other acid gases and vapours
- Filter type K: Ammonia and organic ammonia compounds
- Filter type P3: Dust filter, class 3 for severe conditions
- Filter class: 2 (medium capacity)
- Maximum concentration: 5,000 ppm (0.5%)
- Connection: Screw thread
- Colour: Blue housing with coloured label bands
Normering en veiligheid
- Complies with EN14387 for combined gas and particle filters
- Carries the CE 0426 marking on the label
- Label indicates use below 80% relative humidity