Portwest FD26 Composite Leather High Work Boot S7L
If you're after a premium work boot that doesn't compromise on protection or comfort, the Portwest FD26 Composite Leather High Boot S7L is engineered for those demanding shifts. This rugged high work boot combines lightweight composite construction with full-grain leather to deliver serious performance across construction sites, industrial environments and challenging outdoor conditions. The internal zip closure gets you in and out quickly, whilst water-repellent leather paired with a breathable, waterproof membrane keeps your feet dry when conditions turn wet. You'll find comprehensive protection built in, from the composite toe cap and non-metallic metatarsal guard to reinforced ankle zones. The dual-density PU and rubber outsole handles heat up to 300°C, grips ladders with certified confidence and resists fuel, oil and slippery ceramic floors. Cold insulation technology works hard in freezing environments too. This is the boot that means business.
Key Features
- Lightweight composite S7L construction for reduced fatigue
- Water-repellent leather with breathable, waterproof membrane technology
- Internal zip closure for convenient on and off access
- Entirely metal-free design, detector friendly and antistatic
- Heat-resistant outsole rated to 300°C with certified ladder grip
Recommendations from our Unishore Expert
This work boot delivers where it matters most. The inner zip alongside traditional lacing means you're not wrestling with footwear at the end of a gruelling day, whilst the padded collar and cushioned insole work together to reduce foot fatigue during extended wear. The composite toe and metatarsal protection offer serious defence without the weight of traditional steel, making these boots genuinely comfortable for all-day shifts. If you're working around oils, fuels or grease, the slip-resistant outsole combined with fuel and oil resistance keeps you stable and protected. The cold insulation is tested properly, so you'll know these boots perform in genuine freezing conditions. The ladder grip outsole gives real confidence on industrial rigging and uneven terrain.
Product Features
- Type - High work boot
- Width - Slightly wider (11)
- Safety Classification - S7L per EN ISO 20345:2022 +A1:2024
- Style - Rugged, heavy-duty industrial footwear
- Closure System - Laced with internal side zip
- Protective Toe - Composite (non-metallic)
- Midsole - Metal-free composite, puncture-resistant
- Upper Material - Full-grain leather
- Outsole Material - Dual-density PU and rubber
- Lining - Padded collar and padded tongue
- Energy Absorbing Heel - 20J impact protection (E)
- Antistatic Resistance - Conductive properties (A)
- Fuel and Oil Resistant Sole - FO rated
- Midfoot Bone Protection - 100J metatarsal guard (M)
- Ankle Protection - 10J reinforced zones (AN)
- Ladder Grip Outsole - Certified grip (LG)
- Wear Resistant Toe Cap - Superior durability (SC)
- Non-Slip on Ceramic - Oil and grease resistant (SR)
- Cold Insulation - 30 minutes tested at -17°C (CI)
- Heat Resistant Outsole - 300°C contact heat, 60 seconds (HRO)
- Water-Repellent - Treated full-grain leather
- Breathable Membrane - Moisture management technology
- Reflective Detailing - Enhanced visibility and safety
- Entirely Metal-Free - Nickel and ferrous free, detector friendly
- Article Number - FD26
Standards and Safety
- Meets EN ISO 20345:2022 +A1:2024 safety footwear standards
- Energy absorbing heel protection rated 20J (E)
- Antistatic resistance for controlled environments (A)
- Fuel and oil resistant running sole for industrial sites (FO)
- Midfoot bone protection 100J for metatarsal security (M)
- Ankle protection zone rated 10J for stability (AN)
- Ladder grip outsole with certified slip resistance (LG)
- Wear resistant toe cap for extended durability (SC)
- Non-slip performance on ceramic floors with oil and grease (SR)
- Cold insulation tested 30 minutes at -17°C (CI)
- Heat resistant running sole at 300°C contact for 60 seconds (HRO)