Mascot Footwear Industry Asphalt Work Shoe S1PS BOA with Protective Flap F1100
Working on asphalt puts real demands on your feet, and this Work Shoe is built with that in mind. The sole has no tread, which gives you a flat, stable contact surface on hot tarmac. The BOA Fit System closes and opens the shoe with a rotary dial, wire and guides, and a protective flap covers the dial to shield it. Inside, you'll find a textile penetration-resistant plate, a PU midsole and removable insoles with shock absorption. A composite toe cap and a rubber sole that tolerates contact heat up to 300°C round off this rugged, heavy-duty build.
Key Features
- Rotary BOA Fit System closure with wire guides
- Composite toe cap for wear resistant protection
- Non-marking, anti-slip rubber outsole without tread
- Heat resistant sole up to 300°C contact heat
- Removable shock absorbing insoles on PU midsole
Recommendations from our Unishore Expert
If your day involves hot surfaces and sharp debris, this boot is a smart choice. The sturdy ankle-high upper keeps your foot secure, and the protective flap keeps the dial covered and clean throughout the shift. The smooth outsole without tread gives you reliable grip on hot ground, and the removable insoles let you swap in your own insole if you want extra comfort. Pair them with fitted work trousers for a neat, practical look on site.
Product Features
- Type of footwear - Work Shoe
- Width - Standard (10)
- Standard - EN ISO 20345 Safety Footwear
- Style - Rugged / Heavy Duty
- Closure - Rotary closure (BOA, Fastfit, Speedlace)
- Toe cap - Composite
- Midsole - Metal-free
- Safety class - S1PS
- Outsole material - Rubber
- Upper material - Leather
- Breathable - Yes
- Non-marking sole - Yes
- Heat resistant - Yes
- Penetration resistant - Yes
- Oil-resistant - Yes
- Anti-slip - Yes
- Antistatic - Yes
- Brand - MASCOT®
- Article number - F1100
Standards and Safety
- S1PS safety class under EN ISO 20345:2022
- PS (Perforation-resistant safety sole metal-free, tip 3.0 mm) under EN ISO 20345
- E (Energy absorbing heel 20J) under EN ISO 20345
- A (Antistatic resistance) under EN ISO 20345
- WPA (Splash water penetration 60 min) under EN ISO 20345
- FO (Fuel and oil resistant running sole) under EN ISO 20345
- SC (Wear resistant toe cap) under EN ISO 20345
- SR (non-slip ceramic floors i.c.w. oil/grease) under EN ISO 20345
- HI (Heat insulating 30 min tested with 150℃) under EN ISO 20345
- HRO (Heat resistant running sole 300℃ contact heat 60 seconds) under EN ISO 20345